[Versatile installation options] – IP65 rating supports all weather conditions for both indoor or outdoor installations.
[1/3 Lightweight & 20-year Lifetime] - Our 48V RV battery can run over 8000 cycles, which is quite superior to lead acid batteries with 200~500 cycles (3-year lifetime). Plus, the lifepo4 battery is only 1/3 the weight of a lead acid battery at the same capacity.
[High-Performance BMS] - Lithium battery for rv solar system has built-in BMS to protect it from overcharge, over-discharge, over-current, temp, and short circuits. Without memory effect, no matter what state the battery is, it can be used as soon as it is charged.
Model No. | RV512228 |
Rated voltage | 48/51.2V |
Rated capacity | 228Ah |
Rated energy | 11.67Kwh |
Voltage range | 43.2-58.4V |
Charge voltage | 58.4V (max.60V) |
Charge currency | 150A |
Continuous charge currency | 150A |
Work temperature | -20℃-60℃ |
Cycle life | ≥8000 times(90%DOD) |
Communication | RS232,RS485,CAN |
Connection type | 16S1P |
Size | 630*355*300±2mm |
Weight | 90kg |
material | Lifepo4 |
Item | Specifications | Unit |
Overcharge Protection Voltage | 3.65±0.025V | V |
Overcharge Release Voltage | 3.5±0.05V | V |
Over Charge Detection Delay Time | 300-500mS/ | mS |
Over Discharge Detection Voltage | 2.5±0.05V | V |
Over Discharge Release Voltage | 2.6±0.05V | V |
Over Discharge Detection Delay Time | 300-500mS/ | ms |
Balanced Start Voltage | 3.60±0.05V | V |
Balanced Start Current | 50-60mA | mA |
Continuous Discharge Current | ≤150 | A |
Over-current Detection Current | 240-260A | A |
Over-current Detection Delay Time | 200-300mS/ | ms |
Short Circuit Protection | Disconnect the load |
|
Current Consumption (Operation) | ≤35μA/ | uA |
Our 48v rv battery is a variety of functions and styles are freely customized, supporting OEM/ODM services.
Our rv battery for yacht used the KAT Lifepo4 battery cells (No.1 in world), over 6000 cycles, 20+ years lifespan.
The production line adopts automatic equipment such as fully automatic welding to reduce more manual errors and speed up the production process.
Build an LED display outside the product group to visualize the overall data and status of the battery pack. You can also DIY the operation functions of the display according to your needs.
Not only can we know whether the remaining available capacity of the battery can meet our demand for the total temporary power consumption, but also know when each single battery and battery pack needs to be replaced and repaired.